Doc ID: 12080006 Rev: A
Page 9
Technical Support: 800-626-6912 Date: 2/19/10
Product Specifications
25th Anniversary Murano Spa Specifications
• Overall dimensions with seat back, glass basin raised and seat in full recline:
With out manicure trays 74"L (188cm) x 32"W (82cm) x 55”H Max (140cm)
With manicure trays 74”L (188cm) x 55”W (130cm) x 55”H Max (140cm)
• Empty Weight: 350lbs. (159kg)
• Shipping Weight: 400lbs (182 kg) Ships fully assembled except for the outer cover.
• Capacity of Tub: 5 U.S. Gallons
• Power Source: 120V AC/15Amp, 60HZ (dedicated circuit, GFCI Protected)
• Construction: Glass Reinforced Polyester (GRP) frame covers, steel frame
• Glass Basin: Borosilicate glass; Impact resistant, thermal shock resistant, scratch resistant, chemical and
stain resistant.
• Glass Basin Dimensions: 25.5" L X 24.5"W X 9"H.
• Clean Touch Pipe-Free System: No closed loop circulating pipes, 100% fully drained and cleanable.
• Regulatory compliance: Electrical: UL 1951,
Plumbing: ASME 112.18.3
EMC: EN55041-1:2006 & EN55014-2: 1997
Important Requirements
European Touch requires that you contact a local, licensed plumber and licensed electrician to install your new
pedicure spa. Installation must be in compliance with all your local and state building codes. Your pedicure
spa cannot operate efficiently or safely unless it is provided with adequate electrical power, sufficient water
pressure, proper water temperature, and required drainage capabilities. Contact your local building inspector
for information regarding local code compliance procedures that need to be followed when having these spas
installed. Subsequent inspections and approvals that may be required are the responsibility of the purchaser.
(See limited warranty regarding incidental or consequential exclusions – page 2).
Plumbing & Certifications
• Hot & Cold water supply lines required. The 25th Anniversary Murano Spa “tail” contains the hot & cold
water supply hoses and the drain hose. The hoses are ½” ID hoses that are 6" long from the back of the 25th
Anniversary Murano Spa. The connection is ½” female hose fitting. The maximum supply water
temperature must not exceed 120° F (49° C). See Commonwealth of Massachusetts for local specifics
below.
• Compliant with IAPMO plumbing standards.
• Compliant with ASME standards A112.18.3 for backflow protection and A112.9 for water retention.
• The 25th Anniversary Murano Spa has been designed with the latest technology plumbing components,
which are approved to ASSE, and IAPMO standards.
Commonwealth of Massachusetts Plumbing & Certifications
• All plumbing must be installed by a plumber licensed by the commonwealth of Massachusetts.
• All plumbing products shall be in compliance with the Commonwealth of Massachusetts State Fuel & Gas
plumbing codes CMR 248; 1.00-7.00 as amended.
• All plumbing installations shall include back flow protection devices in compliance with CMR 248,
Massachusetts State Plumbing Code.
o Water temperature not to exceed 130°F (54°C) max.
NOTE
1
: All specifications are subject to change without notice.
NOTE
2
: All dimensions are approximate.
(12 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales